As we've already said, RejeX leaves a shinier, longer-lasting finish than wax. RejeX can be used over existing wax however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES before it has cured, the contaminants may interfere with the film, preventing the RejeX from achieving it's maximum performance and durability. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. It is very important to allow RejeX to cure for 12 hours after the haze has been wiped off. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.Ĭuring RejeX is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film.
If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won't perform up to its potential. RejeX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. It's easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, etc. RejeX is a thin-film polymer coating designed to provide a high-release surface.
0 kommentar(er)
